Loading...
Gadget by Dot Net Spiders.

Tuesday, September 29, 2009

Dot Net Framework FAQ - Part Six

What are the Main Features of .NET platform?
Features of .NET Platform are :-
Common Language Runtime
Explains the features and benefits of the common language runtime, a run-time environment that manages the execution of code and provides services that simplify the development process.
Assemblies
Defines the concept of assemblies, which are collections of types and resources that form logical units of functionality. Assemblies are the fundamental units of deployment, version control, reuse, activation scoping, and security permissions.
Application Domains
Explains how to use application domains to provide isolation between applications.
Runtime Hosts
Describes the runtime hosts supported by the .NET Framework, including ASP.NET, Internet Explorer, and shell executables.
Common Type System
Identifies the types supported by the common language runtime.
Metadata and Self-Describing Components
Explains how the .NET Framework simplifies component interoperation by allowing compilers to emit additional declarative information, or metadata, into all modules and assemblies.
Cross-Language Interoperability
Explains how managed objects created in different programming languages can interact with one another.
.NET Framework Security
Describes mechanisms for protecting resources and code from unauthorized code and unauthorized users.
.NET Framework Class Library
Introduces the library of types provided by the .NET Framework, which expedites and optimizes the development process and gives you access to system functionality.

What is the use of JIT ?
JIT (Just - In - Time) is a compiler which converts MSIL code to Native Code (ie.. CPU-specific code that runs on the same computer architecture).
Because the common language runtime supplies a JIT compiler for each supported CPU architecture, developers can write a set of MSIL that can be JIT-compiled and run on computers with different architectures. However, your managed code will run only on a specific operating system if it calls platform-specific native APIs, or a platform-specific class library.
JIT compilation takes into account the fact that some code might never get called during execution. Rather than using time and memory to convert all the MSIL in a portable executable (PE) file to native code, it converts the MSIL as needed during execution and stores the resulting native code so that it is accessible for subsequent calls. The loader creates and attaches a stub to each of a type's methods when the type is loaded. On the initial call to the method, the stub passes control to the JIT compiler, which converts the MSIL for that method into native code and modifies the stub to direct execution to the location of the native code. Subsequent calls of the JIT-compiled method proceed directly to the native code that was previously generated, reducing the time it takes to JIT-compile and run the code.

What meant of assembly & global assembly cache (gac) & Meta data?
Assembly :-- An assembly is the primary building block of a .NET based application. It is a collection of functionality that is built, versioned, and deployed as a single implementation unit (as one or more files). All managed types and resources are marked either as accessible only within their implementation unit, or as accessible by code outside that unit. It overcomes the problem of 'dll Hell'.The .NET Framework uses assemblies as the fundamental unit for several purposes:
  • Security
  • Type Identity
  • Reference Scope
  • Versioning
  • Deployment
Global Assembly Cache :-- Assemblies can be shared among multiple applications on the machine by registering them in global Assembly cache(GAC). GAC is a machine wide a local cache of assemblies maintained by the .NET Framework. We can register the assembly to global assembly cache by using gacutil command.
We can Navigate to the GAC directory, C:\winnt\Assembly in explore. In the tools menu select the cache properties; in the windows displayed you can set the memory limit in MB used by the GAC
MetaData :--Assemblies have Manifests. This Manifest contains Metadata information of the Module/Assembly as well as it contains detailed Metadata of other assemblies/modules references (exported). It's the Assembly Manifest which differentiates between an Assembly and a Module.

What are the mobile devices supported by .net platform?
The Microsoft .NET Compact Framework is designed to run on mobile devices such as mobile phones, Personal Digital Assistants (PDAs), and embedded devices. The easiest way to develop and test a Smart Device Application is to use an emulator.
These devices are divided into two main divisions:
1) Those that are directly supported by .NET (Pocket PCs, i-Mode phones, and WAP devices)
2) Those that are not (Palm OS and J2ME-powered devices).

What is GUID , why we use it and where?
GUID :-- GUID is Short form of Globally Unique Identifier, a unique 128-bit number that is produced by the Windows OS or by some Windows applications to identify a particular component, application, file, database entry, and/or user. For instance, a Web site may generate a GUID and assign it to a user's browser to record and track the session. A GUID is also used in a Windows registry to identify COM DLLs. Knowing where to look in the registry and having the correct GUID yields a lot information about a COM object (i.e., information in the type library, its physical location, etc.). Windows also identifies user accounts by a username (computer/domain and username) and assigns it a GUID. Some database administrators even will use GUIDs as primary key values in databases.
GUIDs can be created in a number of ways, but usually they are a combination of a few unique settings based on specific point in time (e.g., an IP address, network MAC address, clock date/time, etc.).

Describe the difference between inline and code behind - which is best in a loosely coupled solution?
ASP.NET supports two modes of page development: Page logic code that is written inside runat="server"> blocks within an .aspx file and dynamically compiled the first time the page is requested on the server. Page logic code that is written within an external class that is compiled prior to deployment on a server and linked ""behind"" the .aspx file at run time.

Whats MSIL, and why should my developers need an appreciation of it if at all?
When compiling the source code to managed code, the compiler translates the source into Microsoft intermediate language (MSIL). This is a CPU-independent set of instructions that can efficiently be converted to native code. Microsoft intermediate language (MSIL) is a translation used as the output of a number of compilers. It is the input to a just-in-time (JIT) compiler. The Common Language Runtime includes a JIT compiler for the conversion of MSIL to native code.
Before Microsoft Intermediate Language (MSIL) can be executed it, must be converted by the .NET Framework just-in-time (JIT) compiler to native code. This is CPU-specific code that runs on the same computer architecture as the JIT compiler. Rather than using time and memory to convert all of the MSIL in a portable executable (PE) file to native code. It converts the MSIL as needed whilst executing, then caches the resulting native code so its accessible for any subsequent calls.

How many .NET languages can a single .NET DLL contain?
One

What type of code (server or client) is found in a Code-Behind class?

Server

Whats an assembly?
Assemblies are the building blocks of .NET Framework applications; they form the fundamental unit of deployment, version control, reuse, activation scoping, and security permissions. An assembly is a collection of types and resources that are built to work together and form a logical unit of functionality. An assembly provides the common language runtime with the information it needs to be aware of type implementations. To the runtime, a type does not exist outside the context of an assembly.

How many classes can a single .NET DLL contain?

Unlimited.

What is the difference between string and String ?

No difference

What is manifest?
It is the metadata that describes the assemblies.

What is metadata?
Metadata is machine-readable information about a resource, or ""data about data."" Such information might include details on content, format, size, or other characteristics of a data
source. In .NET, metadata includes type definitions, version information, external assembly references, and other standardized information.

What are the types of assemblies?
There are four types of assemblies in .NET:
Static assemblies
These are the .NET PE files that you create at compile time.
Dynamic assemblies
These are PE-formatted, in-memory assemblies that you dynamically create at runtime using the classes in the System.Reflection.Emit namespace.
Private assemblies
These are static assemblies used by a specific application.

Public or shared assemblies
These are static assemblies that must have a unique shared name and can be used by any application.
An application uses a private assembly by referring to the assembly using a static path or through an XML-based application configuration file. While the CLR doesn't enforce versioning policies-checking whether the correct version is used-for private assemblies, it ensures that an
application uses the correct shared assemblies with which the application was built. Thus, an application uses a specific shared assembly by referring to the specific shared assembly, and the CLR ensures that the correct version is loaded at runtime.
In .NET, an assembly is the smallest unit to which you can associate a version number;

What are delegates?where are they used ?
A delegate defines a reference type that can be used to encapsulate a method with a specific signature. A delegate instance encapsulates a static or an instance method. Delegates are roughly similar to function pointers in C++; however, delegates are type-safe and secure.

When do you use virutal keyword?.
When we need to override a method of the base class in the sub class, then we give the virtual keyword in the base class method. This makes the method in the base class to be overridable. Methods, properties, and indexers can be virtual, which means that their implementation can be overridden in derived classes.

What are class access modifiers ?
Access modifiers are keywords used to specify the declared accessibility of a member or a type. This section introduces the four access modifiers:
  • Public - Access is not restricted.
  • Protected - Access is limited to the containing class or types derived from the containing class.
  • Internal - Access is limited to the current assembly.
  • Protected inertnal - Access is limited to the current assembly or types derived • from the containing class.
  • Private - Access is limited to the containing type.

What Is Boxing And Unboxing?
Boxing :- Boxing is an implicit conversion of a value type to the type object type
Example:-
Consider the following declaration of a value-type variable:
int i = 123;
object o = (object) i;
Boxing Conversion
UnBoxing :- Unboxing is an explicit conversion from the type object to a value type
Eg:
int i = 123; // A value type
object box = i; // Boxing
int j = (int)box; // Unboxing
Read more On "Dot Net Framework FAQ - Part Six" >>>

Saturday, September 26, 2009

Dot Net Framework FAQ - Part Five

Describe the accessibility modifier "protected internal"?
It is available to derived classes and classes within the same Assembly (and naturally from the base class it's declared in).

What's the top .NET class that everything is derived from?
System.Object.

What's the advantage of using System.Text.StringBuilder over System.String?
StringBuilder is more efficient in cases where there is a large amount of string manipulation. Strings are immutable, so each time it's being operated on, a new instance is created.

Can you store multiple data types in System.Array?
No.

What's the .NET class that allows the retrieval of a data element using a unique key?

HashTable.

Will the finally block get executed if an exception has not occurred?

Yes.

What's an abstract class?

A class that cannot be instantiated. An abstract class is a class that must be inherited and have the methods overridden. An abstract class is essentially a blueprint for a class without any implementation.

When do you absolutely have to declare a class as abstract?
  1. When at least one of the methods in the class is abstract.
  2. When the class itself is inherited from an abstract class, but not all base abstract methods have been overridden.

What's an interface?
It's an abstract class with public abstract methods all of which must be implemented in the inherited classes.

Why can't you specify the accessibility modifier for methods inside the interface?
They all must be public. Therefore, to prevent you from getting the false impression that you have any freedom of choice,
you are not allowed to specify any accessibility, it's public by default.

What's the difference between an interface and abstract class?

In an interface class, all methods must be abstract. In an abstract class some methods can be concrete. In an interface class, no accessibility modifiers are allowed, which is ok in an abstract class.

How is method overriding different from method overloading?
When overriding a method, you change the behavior of the method for the derived class. Overloading a method simply involves
having another method with the same name within the class.

Can you declare an override method to be static if the original method is non-static?
No. The signature of the virtual method must remain the same, only the keyword virtual is changed to keyword override.

Can you override private virtual methods?
No. Private methods are not accessible outside the class.

Can you write a class without specifying namespace? Which namespace does it belong to by default?
Yes, you can, then the class belongs to global namespace which has no name. For commercial products, naturally, you wouldn't want global namespace.

What is a formatter?
A formatter is an object that is responsible for encoding and serializing data into messages on one end, and deserializing and decoding messages into data on the other end.

Different b/w .NET & J2EE ?
Differences between J2EE and the .NET Platform

Vendor Neutrality
The .NET platform is not vendor neutral, it is tied to the Microsoft operating systems. But neither are any of the J2EE implementations
Many companies buy into J2EE believing that it will give them vendor neutrality. And, in fact, this is a stated goal of Sun's vision:
A wide variety of J2EE product configurations and implementations, all of which meet the requirements of this specification, are possible. A portable J2EE application will function correctly when successfully deployed in any of these products. (ref : Java 2 Platform Enterprise Edition Specification, v1.3, page 2-7 available at http://java.sun.com/j2ee/)

Overall Maturity
Given that the .NET platform has a three year lead over J2EE, it should be no surprise to learn that the .NET platform is far more mature than the J2EE platform. Whereas we have high volume highly reliable web sites using .NET technologies (NASDAQ and Dell being among many examples)

Interoperability and Web Services
The .NET platform eCollaboration model is, as I have discussed at length, based on the UDDI and SOAP standards. These standards are widely supported by more than 100 companies. Microsoft, along with IBM and Ariba, are the leaders in this area. Sun is a member of the UDDI consortium and recognizes the importance of the UDDI standards. In a recent press release, Sun's George Paolini, Vice President for the Java Community Development, says:
"Sun has always worked to help establish and support open, standards-based technologies that facilitate the growth of network-based applications, and we see UDDI as an important project to establish a registry framework for business-to-business e-commerce.

But while Sun publicly says it believes in the UDDI standards, in reality, Sun has done nothing whatsoever to incorporate any of the UDDI standards into J2EE.

Scalability
Typical Comparision w.r.t Systems and their costs

Framework Support
The .NET platform includes such an eCommerce framework called Commerce Server. At this point, there is no equivalent vendor-neutral framework in the J2EE space. With J2EE, you should assume that you will be building your new eCommerce solution from scratch.

Moreover, no matter what [J2EE] vendor you choose, if you expect a component framework that will allow you to quickly field complete e-business applications, you are in for a frustrating experience.

Language
In the language arena, the choice is about as simple as it gets. J2EE supports Java, and only Java. It will not support any other language in the foreseeable future. The .NET platform supports every language except Java (although it does support a language that is syntactically and functionally equivalent to Java, C#). In fact, given the importance of the .NET platform as a language independent vehicle, it is likely that any language that comes out in the near future will include support for the .NET platform.

Some companies are under the impression that J2EE supports other languages. Although both IBM's WebSphere and BEA's WebLogic support other languages, neither does it through their J2EE technology. There are only two official ways in the J2EE platform to access other languages, one through the Java Native Interface and the other through CORBA interoperability. Sun recommends the later approach. As Sun's Distinguished Scientist and Java Architect Rick Cattell said in a recent interview.

Portability
The reason that operating system portability is a possibility with J2EE is not so much because of any inherent portability of J2EE, as it is that most of the J2EE vendors support multiple operating systems. Therefore as long as one sticks with a given J2EE vendor and a given database vendor, moving from one operating system to another should be possible. This is probably the single most important benefit in favor of J2EE over the .NET platform, which is limited to the Windows operating system. It is worth noting, however, that Microsoft has submitted the specifications for C# and a subset of the .NET Framework (called the common language infrastructure) to ECMA, the group that standardizes JavaScript.
J2EE offers an acceptable solution to ISVs when the product must be marketed to non-Windows customers, particularly when the J2EE platform itself can be bundled with the ISV's product as an integrated offering.
If the primary customer base for the ISV is Windows customers, then the .NET platform should be chosen. It will provide much better performance at a much lower cost.

Client device independence
The major difference being that with Java, it is the presentation tier programmer that determines the ultimate HTML that will be delivered to the client, and with .NET, it is a Visual Studio.NET control.

This Java approach has three problems. First, it requires a lot of code on the presentation tier, since every possible thin client system requires a different code path. Second, it is very difficult to test the code with every possible thin client system. Third, it is very difficult to add new thin clients to an existing application, since to do so involves searching through, and modifying a tremendous amount of presentation tier logic.

The .NET Framework approach is to write device independent code that interacts with visual controls. It is the control, not the programmer, that is responsible for determining what HTML to deliver, based on the capabilities of the client device.. In the .NET Framework model, one can forget that such a thing as HTML even exists!

Conclusion

Sun's J2EE vision is based on a family of specifications that can be implemented by many vendors. It is open in the sense that any company can license and implement the technology, but closed in the sense that it is controlled by a single vendor, and a self contained architectural island with very limited ability to interact outside of itself. One of J2EE's major disadvantages is that the choice of the platform dictates the use of a single programming language, and a programming language that is not well suited for most businesses. One of J2EE's major advantages is that most of the J2EE vendors do offer operating system portability.

Microsoft's .NET platform vision is a family of products rather than specifications, with specifications used primarily to define points of interoperability. The major disadvantage of this approach is that if is limited to the Windows platform, so applications written for the .NET platform can only be run on .NET platforms. Their are several important advantages to the .NET platform:

  • The cost of developing applications is much lower, since standard business languages can be used and device independent presentation tier logic can be written.
  • The cost of running applications is much lower, since commodity hardware platforms (at 1/5 the cost of their Unix counterparts) can be used.
  • The ability to scale up is much greater, with the proved ability to support at least ten times the number of clients any J2EE platform has shown itself able to support.
  • Interoperability is much stronger, with industry standard eCollaboration built into the platform.
Read more On "Dot Net Framework FAQ - Part Five" >>>

Friday, September 25, 2009

Dot Net Framework FAQ - Part Four

How do you initiate a string without escaping each backslash?
Put an @ sign in front of the double-quoted string.

What's the access level of the visibility type internal?
Current application.

Explain encapsulation ?
The implementation is hidden, the interface is exposed.

What data type should you use if you want an 8-bit value that's signed?

sbyte.

Speaking of Boolean data types, what's different between C# and C/C++?
There's no conversion between 0 and false, as well as any other number and true, like in C/C++.

Where are the value-type variables allocated in the computer RAM?
Stack.

Where do the reference-type variables go in the RAM?
The references go on the stack, while the objects themselves go on the heap.

What is the difference between the value-type variables and reference-type variables in terms of garbage collection?
The value-type variables are not garbage-collected, they just fall off the stack when they fall out of scope, the reference-type objects
are picked up by GC when their references go null.

How do you convert a string into an integer in .NET?

Int32.Parse(string)

How do you box a primitive data type variable?
Assign it to the object, pass an object.

Why do you need to box a primitive variable?
To pass it by reference.

What's the difference between Java and .NET garbage collectors?
Sun left the implementation of a specific garbage collector up to the JRE developer, so their performance varies widely, depending on whose JRE you're using. Microsoft standardized on their garbage collection.

How do you enforce garbage collection in .NET?
System.GC.Collect();

What's different about namespace declaration when comparing that to package declaration in Java?
No semicolon.

What's the difference between const and readonly?
You can initialize readonly variables to some runtime values. Let's say your program uses current date and time as one of the values that won't change. This way you declare public readonly string DateT = new DateTime().ToString().

What happens when you encounter a continue statement inside the for loop?
The code for the rest of the loop is ignored, the control is transferred back to the beginning of the loop.

What's the advantage of using System.Text.StringBuilder over System.String?

StringBuilder is more efficient in the cases, where a lot of manipulation is done to the text. Strings are immutable, so each time it's being operated on, a new instance is created.

Can you store multiple data types in System.Array?

No.

What's the difference between the System.Array.CopyTo() and System.Array.Clone()?

The first one performs a deep copy of the array, the second one is shallow.

How can you sort the elements of the array in descending order?
By calling Sort() and then Reverse() methods.

What's the .NET datatype that allows the retrieval of data by a unique key?
HashTable.

What's class SortedList underneath?
A sorted HashTable.

Will finally block get executed if the exception had not occurred?

Yes.

Can multiple catch blocks be executed?
No, once the proper catch code fires off, the control is transferred to the finally block (if there are any), and then whatever follows the finally block.

Why is it a bad idea to throw your own exceptions?

Well, if at that point you know that an error has occurred, then why not write the proper code to handle that error instead of passing a new Exception object to the catch block? Throwing your own exceptions signifies some design flaws in the project.

What's a delegate?
A delegate object encapsulates a reference to a method. In C++ they were referred to as function pointers.

What's a multicast delegate?
It's a delegate that points to and eventually fires off several methods.

How's the DLL Hell problem solved in .NET?
Assembly versioning allows the application to specify not only the library it needs to run (which was available under Win32), but also the version of the assembly.

What are the ways to deploy an assembly?
An MSI installer, a CAB archive, and XCOPY command.

What's a satellite assembly?
When you write a multilingual or multi-cultural application in .NET, and want to distribute the core application separately from the localized modules, the localized assemblies that modify the core application are called satellite assemblies.

What namespaces are necessary to create a localized application?

System.Globalization, System.Resources.

What does assert() do?
In debug compilation, assert takes in a Boolean condition as a parameter, and shows the error dialog if the condition is false. The program proceeds without any interruption if the condition is true.

What's the difference between the Debug class and Trace class?
Documentation looks the same. Use Debug class for debug builds, use Trace class for both debug and release builds.

Why are there five tracing levels in System.Diagnostics.TraceSwitcher?
The tracing dumps can be quite verbose and for some applications that are constantly running you run the risk of overloading the machine and the hard drive there. Five levels range from None to Verbose, allowing to fine-tune the tracing activities.

Where is the output of TextWriterTraceListener redirected?
To the Console or a text file depending on the parameter passed to the constructor.

What namespaces are necessary to create a localized application?
System.Globalization, System.Resources.

What are three test cases you should go through in unit testing?

Positive test cases (correct data, correct output), negative test cases (broken or missing data, proper handling), exception test
cases (exceptions are thrown and caught properly).

Can you change the value of a variable while debugging a C# application?
Yes, if you are debugging via Visual Studio.NET, just go to Immediate window.

What's the implicit name of the parameter that gets passed into the class' set method?
Value, and it's datatype depends on whatever variable we're changing.

How do you inherit from a class in C#?
Place a colon and then the name of the base class. Notice that it's double colon in C++.

Does C# support multiple inheritance?
No, use interfaces instead.

When you inherit a protected class-level variable, who is it available to?

Derived Classes.

What's the top .NET class that everything is derived from?
System.Object.

How's method overriding different from overloading?
When overriding, you change the method behavior for a derived class. Overloading simply involves having a method with the same name within the class.

What does the keyword virtual mean in the method definition?
The method can be over-ridden.

Can you declare the override method static while the original method is non-static?
No, you can't, the signature of the virtual method must remain the same, only the keyword virtual is changed to keyword override.

Can you override private virtual methods?
No, moreover, you cannot access private methods in inherited classes, have to be protected in the base class to allow any sort of access.

Can you prevent your class from being inherited and becoming a base class for some other classes?
Yes, that's what keyword sealed in the class definition is for. The developer trying to derive from your class will get a message: cannot inherit from Sealed class WhateverBaseClassName. It's the same concept as final class in Java.

Can you allow class to be inherited, but prevent the method from being over-ridden?
Yes, just leave the class public and make the method sealed.

Why can't you specify the accessibility modifier for methods inside the interface?
They all must be public. Therefore, to prevent you from getting the false impression that you have any freedom of choice, you are not allowed to specify any accessibility, it's public by default.

Can you inherit multiple interfaces?
Yes, why not.

And if they have conflicting method names?
It's up to you to implement the method inside your own class, so implementation is left entirely up to you. This might cause a problem on a higher-level scale if similarly named methods from different interfaces expect different data, but as far as compiler cares you're
okay.

What's the difference between an interface and abstract class?

In the interface all methods must be abstract, in the abstract class some methods can be concrete. In the interface no accessibility modifiers are allowed, which is ok in abstract classes.

How can you overload a method?
Different parameter data types, different number of parameters, different order of parameters.

If a base class has a bunch of overloaded constructors, and an inherited class has another bunch of overloaded constructors, can you enforce a call from an inherited constructor to an arbitrary base constructor?
Yes, just place a colon, and then keyword base (parameter list to invoke the appropriate constructor) in the overloaded constructor definition inside the inherited class.

What's the difference between System.String and System.StringBuilder classes?
System.String is immutable, System.StringBuilder was designed with the purpose of having a mutable string where a variety of operations can be performed.

Does C# support multiple-inheritance?
No, use interfaces instead.

When you inherit a protected class-level variable, who is it available to?
The derived class.

Are private class-level variables inherited?

Yes, but they are not accessible. Although they are not visible or accessible via the class interface, they are inherited.

Read more On "Dot Net Framework FAQ - Part Four" >>>

Sunday, September 20, 2009

Dot Net Framework FAQ - Part Three

What are the contents of assembly?
In general, a static assembly can consist of four elements:
The assembly manifest, which contains assembly metadata.
Type metadata.
Microsoft intermediate language (MSIL) code that implements the types.
A set of resources.

What is GC (Garbage Collection) and how it works?
One of the good features of the CLR is Garbage Collection, which runs in the background collecting unused object references, freeing us from having to ensure we always destroy them. In reality the time difference between you releasing the object instance and it being garbage collected is likely to be very small, since the GC is always running.
[The process of transitively tracing through all pointers to actively used objects in order to locate all objects that can be referenced, and then arranging to reuse any heap memory that was not found during this trace. The common language runtime garbage collector also compacts the memory that is in use to reduce the working space needed for the heap.]

Heap:
A portion of memory reserved for a program to use for the temporary storage of data structures whose existence or size cannot be determined until the program is running.

Differnce between Managed code and unmanaged code ?
Managed Code:
Code that runs under a "contract of cooperation" with the common language runtime. Managed code must supply the metadata necessary for the runtime to provide services such as memory management, cross-language integration, code access security, and
automatic lifetime control of objects. All code based on Microsoft intermediate language (MSIL) executes as managed code.

Un-Managed Code:
Code that is created without regard for the conventions and requirements of the common language runtime. Unmanaged code executes in the common language runtime environment with minimal services (for example, no garbage collection, limited debugging, and so on).

What is MSIL, IL, CTS and, CLR ?
MSIL: (Microsoft intermediate language)
When compiling to managed code, the compiler translates your source code into Microsoft intermediate language (MSIL), which is a CPU-independent set of instructions that can be efficiently converted to native code. MSIL includes instructions for loading, storing, initializing, and calling methods on objects, as well as instructions for arithmetic and logical operations, control flow, direct memory access, exception handling, and other operations. Before code can be executed, MSIL must be converted to CPU-specific code, usually by a just-in-time (JIT) compiler. Because the common language runtime supplies one or more JIT compilers for each computer architecture it supports, the same set of MSIL can be JIT-compiled and executed on any supported architecture.
When a compiler produces MSIL, it also produces metadata. Metadata describes the types in your code, including the definition of
each type, the signatures of each type's members, the members that your code references, and other data that the runtime uses at
execution time. The MSIL and metadata are contained in a portable executable (PE) file that is based on and extends the published
Microsoft PE and Common Object File Format (COFF) used historically for executable content. This file format, which accommodates

MSIL or native code as well as metadata, enables the operating system to recognize common language runtime images. The
presence of metadata in the file along with the MSIL enables your code to describe itself, which means that there is no need for type libraries or Interface Definition Language (IDL). The runtime locates and extracts the metadata from the file as needed during
execution.

IL: (Intermediate Language)
A language used as the output of a number of compilers and as the input to a just-in-time (JIT) compiler. The common language runtime includes a JIT compiler for converting MSIL to native code.

CTS: (Common Type System)
The specification that determines how the common language runtime defines, uses, and manages types

CLR: (Common Language Runtime)
The engine at the core of managed code execution. The runtime supplies managed code with services such as cross-language integration, code access security, object lifetime management, and debugging and profiling support.

What is Reference type and value type ?
Reference Type:
Reference types are allocated on the managed CLR heap, just like object types.
A data type that is stored as a reference to the value's location. The value of a reference type is the location of the sequence of bits
that represent the type's data. Reference types can be self-describing types, pointer types, or interface types

Value Type:
Value types are allocated on the stack just like primitive types in VBScript, VB6 and C/C++. Value types are not instantiated using new go out of scope when the function they are defined within returns.
Value types in the CLR are defined as types that derive from system.valueType.

A data type that fully describes a value by specifying the sequence of bits that constitutes the value's representation. Type information for a value type instance is not stored with the instance at run time, but it is available in metadata. Value type instances can be treated as objects using boxing.

What is Boxing and unboxing ?
Boxing:
The conversion of a value type instance to an object, which implies that the instance will carry full type information at run time and will be allocated in the heap. The Microsoft intermediate language (MSIL) instruction set's box instruction converts a value type to an object by making a copy of the value type and embedding it in a newly allocated object.

Un-Boxing:
The conversion of an object instance to a value type.

What is JIT and how is works ?
An acronym for "just-in-time," a phrase that describes an action that is taken only when it becomes necessary, such as just-in-time compilation or just-in-time object activation.

What is portable executable (PE) ?
The file format used for executable programs and for files to be linked together to form executable programs.

What is strong name?

A name that consists of an assembly's identity—its simple text name, version number, and culture information (if provided)—strengthened by a public key and a digital signature generated over the assembly. Because the assembly manifest
contains file hashes for all the files that constitute the assembly implementation, it is sufficient to generate the digital signature over just the one file in the assembly that contains the assembly manifest. Assemblies with the same strong name are expected to be identical.

What is global assembly cache?
A machine-wide code cache that stores assemblies specifically installed to be shared by many applications on the computer. Applications deployed in the global assembly cache must have a strong name.

What is difference between constants, readonly and, static ?
Constants: The value can’t be changed
Read-only: The value will be initialized only once from the constructor of the class.
Static: Value can be initialized once.

What is difference between shared and public?
An assembly that can be referenced by more than one application. An assembly must be explicitly built to be shared by giving it a cryptographically strong name.

What is namespace used for loading assemblies at run time and name the methods?
System.Reflection

What are the types of authentication in .net?
We have three types of authentication:
  1. Form authentication
  2. Windows authentication
  3. Passport
This has to be declared in web.config file.

What is the difference between a Struct and a Class ?
The struct type is suitable for representing lightweight objects such as Point, Rectangle, and Color. Although it is possible to represent a point as a class, a struct is more efficient in some scenarios. For example, if you declare an array of 1000 Point objects,
you will allocate additional memory for referencing each object. In this case, the struct is less expensive.
When you create a struct object using the new operator, it gets created and the appropriate constructor is called. Unlike classes, structs can be instantiated without using the new operator. If you do not use new, the fields will remain unassigned and the object cannot be used until all of the fields are initialized. It is an error to declare a default (parameterless) constructor for a struct. A default constructor is always provided to initialize the struct members to their default values.
It is an error to initialize an instance field in a struct.
There is no inheritance for structs as there is for classes. A struct cannot inherit from another struct or class, and it cannot be the base of a class. Structs, however, inherit from the base class Object. A struct can implement interfaces, and it does that exactly as classes do.
A struct is a value type, while a class is a reference type.

How big is the datatype int in .NET?
32 bits.

How big is the char?
16 bits (Unicode).

Read more On "Dot Net Framework FAQ - Part Three" >>>

Saturday, September 19, 2009

Dot Net Framework FAQ - Part Two

What is serialization?
Serialization is the process of converting an object into a stream of bytes. Deserialization is the opposite process of creating an object from a stream of bytes. Serialization / Deserialization is mostly used to transport objects (e.g. during remoting), or to persist objects (e.g. to a file or database).

Does the .NET Framework have in-built support for serialization?
There are two separate mechanisms provided by the .NET class library - XmlSerializer and SoapFormatter/BinaryFormatter. Microsoft uses XmlSerializer for Web Services, and uses SoapFormatter/BinaryFormatter for remoting. Both are available for use in your own code.

Can I customise the serialization process?
Yes. XmlSerializer supports a range of attributes that can be used to configure serialization for a particular class. For example, a field or property can be marked with the [XmlIgnore] attribute to exclude it from serialization. Another example is the [XmlElement]
attribute, which can be used to specify the XML element name to be used for a particular property or field.
Serialization via SoapFormatter/BinaryFormatter can also be controlled to some extent by attributes. For example, the [NonSerialized] attribute is the equivalent of XmlSerializer's [XmlIgnore] attribute. Ultimate control of the serialization process can be acheived by implementing the the ISerializable interface on the class whose instances are to be serialized.

Why is XmlSerializer so slow?
There is a once-per-process-per-type overhead with XmlSerializer. So the first time you serialize or deserialize an object of a given type in an application, there is a significant delay. This normally doesn't matter, but it may mean, for example, that XmlSerializer is a poor choice for loading configuration settings during startup of a GUI application.


Why do I get errors when I try to serialize a Hashtable?
XmlSerializer will refuse to serialize instances of any class that implements IDictionary, e.g. Hashtable. SoapFormatter and BinaryFormatter do not have this restriction.

What are attributes?
There are at least two types of .NET attribute. The first type I will refer to as a metadata attribute - it allows some data to be attached to a class or method. This data becomes part of the metadata for the class, and (like other class metadata) can be accessed via reflection.
The other type of attribute is a context attribute. Context attributes use a similar syntax to metadata attributes but they are fundamentally different. Context attributes provide an interception mechanism whereby instance activation and method calls can be
pre- and/or post-processed.

How does CAS work?

The CAS security policy revolves around two key concepts - code groups and permissions. Each .NET assembly is a member of a particular code group, and each code group is granted the permissions specified in a named permission set.
For example, using the default security policy, a control downloaded from a web site belongs to the 'Zone - Internet' code group, which adheres to the permissions defined by the 'Internet' named permission set. (Naturally the 'Internet' named permission set represents a very restrictive range of permissions.)

Who defines the CAS code groups?
Microsoft defines some default ones, but you can modify these and even create your own. To see the code groups defined on your system, run 'caspol -lg' from the command-line. On my system it looks like this:
Level = Machine
Code Groups:
1. All code: Nothing
1.1. Zone - MyComputer: FullTrust
1.1.1. Honor SkipVerification requests: SkipVerification
1.2. Zone - Intranet: LocalIntranet
1.3. Zone - Internet: Internet
1.4. Zone - Untrusted: Nothing
1.5. Zone - Trusted: Internet
1.6. StrongName - 0024000004800000940000000602000000240000525341310004000003
000000CFCB3291AA715FE99D40D49040336F9056D7886FED46775BC7BB5430BA4444FEF8348EBD06
F962F39776AE4DC3B7B04A7FE6F49F25F740423EBF2C0B89698D8D08AC48D69CED0FC8F83B465E08
07AC11EC1DCC7D054E807A43336DDE408A5393A48556123272CEEEE72F1660B71927D38561AABF5C
AC1DF1734633C602F8F2D5:

Note the hierarchy of code groups - the top of the hierarchy is the most general ('All code'), which is then sub-divided into several
groups, each of which in turn can be sub-divided. Also note that (somewhat counter-intuitively) a sub-group can be associated with a more permissive permission set than its parent.

How do I define my own code group?
Use caspol. For example, suppose you trust code from www.mydomain.com and you want it have full access to your system, but you want to keep the default restrictions for all other internet sites. To achieve this, you would add a new code group as a sub-group of the
'Zone - Internet' group, like this:
caspol -ag 1.3 -site www.mydomain.com FullTrust
Now if you run caspol -lg you will see that the new group has been added as group 1.3.1:

1.3. Zone - Internet: Internet
1.3.1. Site - www.mydomain.com: FullTrust

Note that the numeric label (1.3.1) is just a caspol invention to make the code groups easy to manipulate from the command-line. The underlying runtime never sees it.

How do I change the permission set for a code group?
Use caspol. If you are the machine administrator, you can operate at the 'machine' level - which means not only that the changes you make become the default for the machine, but also that users cannot change the permissions to be more permissive. If you are a normal (non-admin) user you can still modify the permissions, but only to make them more restrictive. For example, to allow intranet code to do what it likes you might do this:
caspol -cg 1.2 FullTrust
Note that because this is more permissive than the default policy (on a standard system), you should only do this at the machine level - doing it at the user level will have no effect.

I can't be bothered with all this CAS stuff. Can I turn it off?
Yes, as long as you are an administrator. Just run: caspol -s off

Can I look at the IL for an assembly?
Yes. Microsoft supply a tool called Ildasm which can be used to view the metadata and IL for an assembly.

Can source code be reverse-engineered from IL?
Yes, it is often relatively straightforward to regenerate high-level source (e.g. C#) from IL.

How can I stop my code being reverse-engineered from IL?
There is currently no simple way to stop code being reverse-engineered from IL. In future it is likely that IL obfuscation tools will become available, either from MS or from third parties. These tools work by 'optimising' the IL in such a way that reverse-engineering becomes much more difficult.
Of course if you are writing web services then reverse-engineering is not a problem as clients do not have access to your IL.

Is there built-in support for tracing/logging?
Yes, in the System.Diagnostics namespace. There are two main classes that deal with tracing - Debug and Trace. They both work in a similar way - the difference is that tracing from the Debug class only works in builds that have the DEBUG symbol defined, whereas tracing from the Trace class only works in builds that have the TRACE symbol defined. Typically this means that you should use System.Diagnostics.Trace.WriteLine for tracing that you want to work in debug and release builds, and System.Diagnostics.Debug.WriteLine for tracing that you want to work only in debug builds.

Can I redirect tracing to a file?
Yes. The Debug and Trace classes both have a Listeners property, which is a collection of sinks that receive the tracing that you send via Debug.WriteLine and Trace.WriteLine respectively. By default the Listeners collection contains a single sink, which is an
instance of the DefaultTraceListener class. This sends output to the Win32 OutputDebugString() function and also the System.Diagnostics.Debugger.Log() method. This is useful when debugging, but if you're trying to trace a problem at a customer site, redirecting the output to a file is more appropriate. Fortunately, the TextWriterTraceListener class is provided for this purpose.

Read more On "Dot Net Framework FAQ - Part Two" >>>

Thursday, September 17, 2009

Dot Net Framework FAQ

When was .NET announced?
Bill Gates delivered a keynote at Forum 2000, held June 22, 2000, outlining the .NET 'vision'. The July 2000 PDC had a number of sessions on .NET technology, and delegates were given CDs containing a pre-release version of the .NET framework/SDK and Visual Studio.NET.

When was the first version of .NET released?

The final version of the 1.0 SDK and runtime was made publicly available around 6pm PST on 15-Jan-2002. At the same time, the final version of Visual Studio.NET was made available to MSDN subscribers.

What platforms does the .NET Framework run on?
The runtime supports Windows XP, Windows 2000, NT4 SP6a and Windows ME/98. Windows 95 is not supported. Some parts of the framework do not work on all platforms - for example, ASP.NET is only supported on Windows XP and Windows 2000. Windows 98/ME cannot be used for development.
IIS is not supported on Windows XP Home Edition, and so cannot be used to host ASP.NET. However, the ASP.NET Web Matrix
web server does run on XP Home.
The Mono project is attempting to implement the .NET framework on Linux.

What is the CLR?
CLR = Common Language Runtime. The CLR is a set of standard resources that (in theory) any .NET program can take advantage of, regardless of programming language. Robert Schmidt (Microsoft) lists the following CLR resources in his MSDN PDC# article:
Object-oriented programming model (inheritance, polymorphism, exception handling, garbage collection)
Security model
Type system
All .NET base classes
Many .NET framework classes
Development, debugging, and profiling tools
Execution and code management
IL-to-native translators and optimizers
What this means is that in the .NET world, different programming languages will be more equal in capability than they have ever been before, although clearly not all languages will support all CLR services.


What is the CTS?
CTS = Common Type System. This is the range of types that the .NET runtime understands, and therefore that .NET applications can use. However note that not all .NET languages will support all the types in the CTS. The CTS is a superset of the CLS.

What is the CLS?
CLS = Common Language Specification. This is a subset of the CTS which all .NET languages are expected to support. The idea is that any program which uses CLS-compliant types can interoperate with any .NET program written in any language.
In theory this allows very tight interop between different .NET languages - for example allowing a C# class to inherit from a VB class.

What is IL?
IL = Intermediate Language. Also known as MSIL (Microsoft Intermediate Language) or CIL (Common Intermediate Language). All .NET source code (of any language) is compiled to IL. The IL is then converted to machine code at the point where the software is installed, or at run-time by a Just-In-Time (JIT) compiler.

What does 'managed' mean in the .NET context?
The term 'managed' is the cause of much confusion. It is used in various places within .NET, meaning slightly different things.Managed code: The .NET framework provides several core run-time services to the programs that run within it - for example
exception handling and security. For these services to work, the code must provide a minimum level of information to the runtime.
Such code is called managed code. All C# and Visual Basic.NET code is managed by default. VS7 C++ code is not managed by default, but the compiler can produce managed code by specifying a command-line switch (/com+).
Managed data: This is data that is allocated and de-allocated by the .NET runtime's garbage collector. C# and VB.NET data is always managed. VS7 C++ data is unmanaged by default, even when using the /com+ switch, but it can be marked as managed using the __gc keyword.Managed classes: This is usually referred to in the context of Managed Extensions (ME) for C++. When using ME C++, a class can be marked with the __gc keyword. As the name suggests, this means that the memory for instances of the class is managed by the garbage collector, but it also means more than that. The class becomes a fully paid-up member of the .NET community with the benefits and restrictions that brings. An example of a benefit is proper interop with classes written in other languages - for example, a managed C++ class can inherit from a VB class. An example of a restriction is that a managed class can only inherit from one base class.

What is reflection?
All .NET compilers produce metadata about the types defined in the modules they produce. This metadata is packaged along with the module (modules in turn are packaged together in assemblies), and can be accessed by a mechanism called reflection. The System.Reflection namespace contains classes that can be used to interrogate the types for a module/assembly.
Using reflection to access .NET metadata is very similar to using ITypeLib/ITypeInfo to access type library data in COM, and it is used for similar purposes - e.g. determining data type sizes for marshaling data across context/process/machine boundaries.
Reflection can also be used to dynamically invoke methods, or even create types dynamically at run-time.

What is the difference between Finalize and Dispose (Garbage collection) ?
Class instances often encapsulate control over resources that are not managed by the runtime, such as window handles (HWND), database connections, and so on. Therefore, you should provide both an explicit and an implicit way to free those resources. Provide implicit control by implementing the protected Finalize Method on an object (destructor syntax in C# and the Managed Extensions for C++). The garbage collector calls this method at some point after there are no longer any valid references to the object. In some cases, you might want to provide programmers using an object with the ability to explicitly release these external resources before the garbage collector frees the object. If an external resource is scarce or expensive, better performance can be achieved if the programmer explicitly releases resources when they are no longer being used. To provide explicit control, implement the Dispose method provided by the IDisposable Interface. The consumer of the object should call this method when it is done using the object.
Dispose can be called even if other references to the object are alive. Note that even when you provide explicit control by way of Dispose, you should provide implicit cleanup using the Finalize method. Finalize provides a backup to prevent resources from
permanently leaking if the programmer fails to call Dispose.

What is Partial Assembly References?
Full Assembly reference: A full assembly reference includes the assembly's text name, version, culture, and public key token (if the assembly has a strong name). A full assembly reference is required if you reference any assembly that is part of the common
language runtime or any assembly located in the global assembly cache.

Partial Assembly reference: We can dynamically reference an assembly by providing only partial information, such as specifying only the assembly name. When you specify a partial assembly reference, the runtime looks for the assembly only in the application
directory.

We can make partial references to an assembly in your code one of the following ways:

  • A method such as System.Reflection.Assembly.Load and specify only a partial reference. The runtime checks for the assembly in the application directory.
  • Use the System.Reflection.Assembly.LoadWithPartialName method and specify only a partial reference. The runtime checks for the assembly in the application directory and in the global assembly cache.

Changes to which portion of version number indicates an incompatible change?

Major or minor. Changes to the major or minor portion of the version number indicate an incompatible change. Under this convention then, version 2.0.0.0 would be considered incompatible with version 1.0.0.0. Examples of an incompatible change would be a change to the types of some method parameters or the removal of a type or method altogether. Build. The Build number is typically used to distinguish between daily builds or smaller compatible releases. Revision. Changes to the revision number are typically reserved for an incremental build needed to fix a particular bug. You'll sometimes hear this referred to as the "emergency bug fix" number in that the revision is what is often changed when a fix to a specific bug is shipped to a customer.

What is side-by-side execution? Can two application one using private assembly and other using Shared assembly be stated as a side-by-side executables?
Side-by-side execution is the ability to run multiple versions of an application or component on the same computer. You can have multiple versions of the common language runtime, and multiple versions of applications and components that use a version of the runtime, on the same computer at the same time. Since versioning is only applied to shared assemblies, and not to private assemblies, two application one using private assembly and one using shared assembly cannot be stated as side-by-side
executables.

Why string are called Immutable data Type ?
The memory representation of string is an Array of Characters, So on re-assigning the new array of Char is formed & the start address is changed . Thus keeping the Old string in Memory for Garbage Collector to be disposed.

What does assert() method do?
In debug compilation, assert takes in a Boolean condition as a parameter, and shows the error dialog if the condition is false. The program proceeds without any interruption if the condition is true.

What's the difference between the Debug class and Trace class?
Use Debug class for debug builds, use Trace class for both debug and release builds.

Why are there five tracing levels in System.Diagnostics.TraceSwitcher?
The tracing dumps can be quite talkative. For applications that are constantly running you run the risk of overloading the machine and the hard drive. Five levels range from None to Verbose, allowing you to fine-tune the tracing activities.

Where is the output of TextWriterTraceListener redirected?
To the Console or a text file depending on the parameter passed to the constructor.

How do assemblies find each other?
By searching directory paths. There are several factors which can affect the path (such as the AppDomain host, and application configuration files), but for private assemblies the search path is normally the application's directory and its sub-directories. For shared assemblies, the search path is normally same as the private assembly path plus the shared assembly cache.

How does assembly versioning work?
Each assembly has a version number called the compatibility version. Also each reference to an assembly (from another assembly) includes both the name and version of the referenced assembly.The version number has four numeric parts (e.g. 5.5.2.33). Assemblies with either of the first two parts different are normally viewed as incompatible. If the first two parts are the same, but the third is different, the assemblies are deemed as 'maybe compatible'. If only the fourth part is different, the assemblies are deemed compatible. However, this is just the default guideline - it is the version policy that decides to what extent these rules are enforced. The version policy can be specified via the application configuration file.

What is garbage collection?
Garbage collection is a system whereby a run-time component, it takes responsibility for managing the lifetime of objects and the heap memory that they occupy. This concept is not new to .NET - Java and many other languages/runtimes have used garbage collection for some time.

Why doesn't the .NET runtime offer deterministic destruction?
Because of the garbage collection algorithm. The .NET garbage collector works by periodically running through a list of all the objects that are currently being referenced by an application. All the objects that it doesn't find during this search are ready to be destroyed and the memory reclaimed. The implication of this algorithm is that the runtime doesn't get notified immediately when the final reference on an object goes away - it only finds out during the next sweep of the heap.
Futhermore, this type of algorithm works best by performing the garbage collection sweep as rarely as possible. Normally heap exhaustion is the trigger for a collection sweep.

Is the lack of deterministic destruction in .NET a problem?
It's certainly an issue that affects component design. If you have objects that maintain expensive or scarce resources (e.g. database locks), you need to provide some way for the client to tell the object to release the resource when it is done. Microsoft recommend that you provide a method called Dispose() for this purpose. However, this causes problems for distributed objects - in a distributed system who calls the Dispose() method? Some form of reference-counting or ownership-management mechanism is needed to handle distributed objects - unfortunately the runtime offers no help with this.
Read more On "Dot Net Framework FAQ" >>>

RECENT POSTS

Related Posts with Thumbnails